NXP Semiconductors
UM10276_1
TED-Kit 2 User Manual
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
User manual
Rev. 1.29 — 20 August 2010
19 of 79
Fig 23. Immobilizer EEPROM
Note: This button is active only while the Immobilizer applet runs.
A new window opens showing 3 main parts. In the upper part of the window, the timings
regarding each reading operation are shown.
Fig 24. EEPROM read timings
The middle part with the tabs shows the different views for the EEPROM content and its
configuration.
Note: In the EEPROM Tab only the memory pages currently visible are read from
the transponder. Scrolling to another section of the grid requires a short amount
of time until the actual content is shown. As long as the memory window is open
the content is refreshed multiple times per second.
The
E
E
E
E
P
P
R
R
O
O
M
M
tab shows the memory grid for the physical page, segment, block and page
number, the content of that page and a description of the value if applicable (Fig 25).
