NXP Semiconductors
UM11666
SC18IS606-EVB evaluation board
4.4.3 SPI mode and clock configuration
Write 0x50 0xF0 0x02 // Set SPI mode 0, MSB first, SPI clock to 115KHz
Write 0x50 0xF0 0x05 // Set SPI mode 1, MSB first, SPI clock to 461KHz
4.4.4 Device ID read
Write 0x50 0xFE // Read device ID into buffer
Read 0x51 0x10 // read 16 bytes from buffer, return data 0x53
// 0x43 0x31 0x38 0x49 0x53 ….. 0x30 0x2E 0x31 0x00
4.4.5 On-board EEPROM write and read
Write 0x50 0xF0 0x0C // SPI mode 3, SPI clock to 1.875MHz
Write 0xF1 // clear interrupt
Write 0x02 0x06 // send command 0x06 (write enable latch) to EEPROM with SS1 as -CS
Write 0x02 0x02 0x00 0x00 0x30 0x01 0x03 0x05 0x07 0x09 0x0B
// write data (0x01 0x03 … 0x0b) to EEPROM
Write 0x02 0x03 0x00 0x00 0x30 0x00 0x00 0x00 0x00 0x00 0x00
// Read data back from EEPROM into buffer
Read 0x51 0x0A // Read 10 bytes from buffer. The first four bytes should be discarded
5 Errata list
Date
Errata Description
Demo Impact
Solution
-
None
None
None
Table 5. Errata list
UM11666
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
User manual
Rev. 1.0 — 28 September 2021
7 / 10