NXP Semiconductors QorIQ T2080, Быстрый старт

Страница: 10 / 12

cp.b 300000 e8000000 100 (RCW)
cp.b 400000 efe00000 30000 (CS4315 PHY ucode)
8. Power down, set DIP switches as:
• SW1: 0001 0011
• SW2: 1011 1111
• SW3: 1100 0001
9. Turn on power. The system enters the U-Boot environment.
9 Revision history
This table summarizes revisions to this document.
Table 6. Revision history
Revision Date Topic cross-reference Description
Rev. 1 08/2021
System board interface Updated Figure 3 .
Block diagram Updated Figure 4 for LTC3882 device and AQR113C
PHYs detail.
Port map Updated Table 2 for AQR113C PHYs description and
port names in U-Boot.
Preparing board Updated U-Boot log.
Rev. 0 02/2015 - Initial public release.
NXP Semiconductors
Revision history
QorIQ T2080 Reference Design Board (T2080RDB-PC) Quick Start, Rev. 1, 08/2021
User Guide 10 / 12