NXP Semiconductors PCF85063TP-ARD, Руководство пользователя, Страница: 15 / 24

NXP Semiconductors
UM11705
PCF85063TP-ARD evaluation board
5. Open the GUI application to operate the device from the PC. For details regarding
GUI operation see next section 8 “GUI description”;
Figure 5 shows the two boards in operation.
Figure 6. PCF85063TP-ARD daughter board / LPCXpresso55S69 mother board operation
6.3 Using the PCF85063TP-ARD with an i.MX 8M Mini LPDDR4 EVK
board
When an i.MX 8M Mini LPDDR4 EVK board is used with the PCF85063TP-ARD board, a
third board (IMX8MMINI-IARD interposer board) must be used, especially designed and
built as EVK – daughter board interconnection. The EVK board i.MX 8M Mini LPDDR4
is not equipped with an Arduino port; instead it has a 2 x 20 pin expansion connector
(J1003, see i.MX 8M Mini LPDDR4 EVK user manual). J1003 is a multipurpose port,
containing various digital I/O lines, including specialized I
2
C and SPI buses. Starting from
the expansion connector pin chart, an Arduino port interposer board was developed,
with the role of signal-to-signal bridge between the 2 x 20 connector pins on the i.MX
8M Mini LPDDR4 EVK and the mated connectors of the Arduino port present on the
PCF85063TP-ARD daughter board.
To operate the setup, along with the EVK and the daughter board, a third board must be
included in the setup assembly. Figure 7 shows the necessary boards and how these
boards are connected. The configuration consists of:
• One i.MX 8M Mini LPDDR4 EVK board
•
One PCF85063TP-ARD daughter board
• One IMX8MMINI-IARD interposer board
• One USB-A / USB-C cable
UM11705 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
User manual Rev. 1.0 — 19 November 2021
15 / 24