manualshive.com logo in svg

NXP Semiconductors PCA9959HN-ARD, Руководство пользователя, Страница: 11 / 32

Поделиться
Скачать
NXP Semiconductors PCA9959HN-ARD Скачать руководство пользователя страница 11

NXP Semiconductors

UM11623

PCA9959HN-ARD evaluation board

on the type of EVK being used and the current rating of the Arduino/Fuji connectors

(approx. 4.5 A). The current limitation as a function of the EVK is as follows:

•

IMXRT1050 EVK:

–

EVK powered from USB: limited by the current rating of the USB connector – max. 2

boards

–

EVK powered from power barrel connector (J2): limited by power rating of Arduino /

Fuji connectors – max. 3 boards

•

LPCXpresso55S69 EVK: limited by the current rating of the USB connector – max. 2

boards

•

i.MX LPDDR4 EVK: limited by the current delivered by the EVK power supply – max. 2

boards

The onboard LED D2 is a 3.3 V rail indicator, and D3 is a 5.0 V rail indicator.

5.10 Schematic, board layout and bill of materials

The schematic, board layout and bill of materials for the PCA9959HN-ARD evaluation

board are available at 

http://www.nxp.com/PCA9959HN-ARD

.

UM11623

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2021. All rights reserved.

User manual

Rev. 1 — 21 May 2021

11 / 32

Содержание PCA9959HN-ARD

































Отзывы:

Нет отзывов