NXP Semiconductors
UM11216
PCA9420UK-EVM evaluation board user manual
UM11216
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2020. All rights reserved.
User manual
Rev. 1.2 — 11 March 2020
13 / 26
9 PCA9420 GUI Software Installation
•
Unzip the provided PCA9420 Evaluation Kit GUI installation execution file, follow the
step by step instruction on the screen.
•
During the installation process, the FTDI interface cable driver will also be installed,
please refer to the screen capture for the reference. When correctly installed, the figure
shown below on the right pop up on the screen. Click “Finish” button to continue.
Figure 5. GUI Installation
•
Once the installation finished, the GUI will be automatically launched. Please note that
since the standalone evaluation board has not been powered up, no communication
channel is established between the computer (GUI) via the interface cable to the
evaluation board, and it shows “Disconnected” at the bottom left of the GUI.