manualshive.com logo in svg

NXP Semiconductors P5010, Руководство пользователя, Страница: 2 / 77

Поделиться
Скачать
NXP Semiconductors P5010 Скачать руководство пользователя страница 2

P5040/P5020 Reference Design Board User Guide, Rev. 0

2

Freescale Semiconductor

 

Features

The initial version of the Software Development Kit (version 1.3) is shipped with the P5040/P5020 
reference design board. The customer should check for new patch releases, which generally are updated 
on Freescale.com two times a year.

2

Features

The general features of the P5040/P5020RDB are as follows:

•

P5040/P5020 supports functions that include the following:

— Standard 400W 1U power supply connector

— One SD card/MMC connector

— SerDes PCI-Express (PCIe) connector

– One PCIe x2/x4 connector (SerDes lanes “A” through connector “D”), which can support 

up to four lanes of PCIe 2.0/1.0

– One mini PCIe x1 connector 

– Two Type A USB 2.0 connectors.

— One DUART DB-9 RS-232 connector (muxed UART0/1 and UART 2/3 serial ports) that 

operate at up to 115200 Kbps

— Two XAUI copper (10Gbit RJ-45 connectors) and two fiber optic SFP+ connectors

– One dual-port TN8022 PHY supporting two XAUI copper link(10GHz) and two XFI link 

supporting 10GHz modules.

– Two SATA II connectors

— Two Gigabit Ethernet ports 0 and 1 supporting one dual RGMII (1-GHz) RJ-45 Ethernet 

connectors

– One dual-port PHY supporting one dual RGMII (1GHz/100/10-MHz) multifunction FPGA 

— Two dual ported SGMII connectors supporting Gigabit Ethernet ports 0(top)/1(bottom) and 

ports 2(top)/3(bottom)

– One quad-port PHY supporting four SGMII (1GHz) links

— Programmed by the processor on the following a power-up or hard reset. The FPGA 

functionality varies depending on the specific processor. 

Table 1. Useful References

Topic

Document Title

Document ID

System design

P5040 QorIQ Integrated Processor Hardware Specifications
P5020 QorIQ Integrated Processor Hardware Specifications

P5040EC/

P5020EC

SoC programming

P5040 QorIQ Integrated Multicore Communication Processor Family Reference Manual

 P5040RM

P5020 QorIQ Integrated Multicore Communication Processor Family Reference Manual

 P5020RM

Switch 

configuration

P5040/P5020DS Configuration Sheet

—

SystemID format

The SystemID Format for Power Architecture® Development Systems

AN3638

Содержание P5010














































































Отзывы:

Нет отзывов