NXP Semiconductors
UM11099
PCAL6534 demonstration board OM13541
UM11099
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2019. All rights reserved.
User manual
Rev. 1.0 — 1 August 2019
4 / 29
2 Features of the OM13541 34-bit GPIO daughter board
•
Direct connection to OM13260 Fm+ I
2
C-bus Development board
•
Easy to use GUI-based software demonstrates the capabilities of the PCAL6534
•
Jumper configuration for most features of PCAL6534
•
Flexible power supply configuration: 3.3 V, 5 V or external supply
•
Direct connection to OM13303 GPIO Target board for I/O visualization
•
Convenient test points for easy scope measurements and signal access
•
Jumper configuration of device I
2
C address
•
LED indicators for power and INT
•
No external power supply required and o5 V power from PC USB port