manualshive.com logo in svg

NXP Semiconductors MPC5644A, Справочное руководство, Страница: 639 / 1735

Поделиться
Скачать
NXP Semiconductors MPC5644A Скачать руководство пользователя страница 639

Configurable Enhanced Modular IO Subsystem (eMIOS200)

MPC5644A Microcontroller Reference Manual, Rev. 6

Freescale Semiconductor

639

 

Chapter 22  
Configurable Enhanced Modular IO Subsystem (eMIOS200)

22.1

Device-specific features

•

Sixteen 24-bit wide channels

•

3 channels internal timebases can be shared between channels

•

1 timebase from the eTPU can be imported and used by the channels

•

Global enable feature for all eMIOS200 and eTPU timebases

•

Doze mode is not supported

•

Each channel has its own pin (not available on all package types)

22.2

Introduction

The eMIOS200 module provides the capability to generate or measure timed events, for example 
generating PWM waveforms or measuring input pulse width. It is implemented with its own configuration 
of timer channels to suit the target applications needs, while maintaining full backwards compatibility with 
previous eMIOS implementations. The MPC5644A has one eMIOS200 module that implements 
twenty-four 24-bit counters.

The overall architecture of the eMIOS200 resembles that of its predecessor, the MIOS. The MIOS timer 
block provided a framework where a set of sublocks with different timer functions were assembled to 
attend the specific needs of a device. The MPC5644AeMIOS200 builds on this concept by using a 
modified Unified Channel module that provides a superset of the functionality of individual MIOS 
channels, while providing a consistent user interface. This allows more flexibility as each channel can be 
programmed for different functions in different applications of the device. In addition, the eMIOS200 
architecture allows the use of dedicated channels that perform specific functions not included in MIOS 
inheritance.

NOTE

The MPC5644A eMIOS200 uses a modified version of the Unified Channel 
block that contains a reduced set of functions compared to the MPC55xx 
Unified Channel. See 

Section 22.2.3, Channel configurations

, for details.

Figure 22-1

 shows the block diagram of the MPC5644A eMIOS200 module.

Содержание MPC5644A








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов