manualshive.com logo in svg

NXP Semiconductors MPC5566, Справочное руководство

Поделиться
Скачать
NXP Semiconductors MPC5566 Скачать руководство пользователя страница 763

Enhanced Time Processing Unit (eTPU)

MPC5566 Microcontroller Reference Manual, Rev. 2

18-6

Freescale Semiconductor

18.1.4.4

Shared Data Memory (SDM)

The SDM works as data RAM that can be accessed by the device core and up to two eTPU engines. This 
memory is used for either:

•

Information transfer between the device core and the eTPU

•

Data storage for the eTPU microcode program

•

Communication between the two eTPU engines

The SDM width is 32 bits, and is accessible by the host in any of the three formats: byte, 16-bit, or 32-bit. 
The eTPU can access the SDM’s full 32 bits, lower 24 bits or upper byte (8-bit). The host can also access 
the SDM space mirrored in an alternate area with parameter sign extension (PSE). PSE allows accessing 
24-bit data as 32-bit sign-extended data without using the device’s bandwidth to extend the data. 

Parameter sign extension accesses differ from the usual host accesses to the original SDM area:

Writes are effective only to the lower 3-bytes of a word: the word’s most significant byte (byte address) is 
kept unaltered in SDM.

Figure 18-3. SDM PSE Area Write

NOTE

For the most significant byte, the word format is big endian.

Reads return the lower 3-bytes of a word sign-extended to 32 bits; the most significant bit of the word’s 
second most significant byte (byte addresses) is copied in all 8 bits of the most significant read byte.

[31:24]

[23:16]

[15:8]

[7:0]

Write 24-bit data

SDM

Most 

byte

significant

Lower three bytes

Содержание MPC5566





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды