NXP Semiconductors MP-A11 Series Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 57

NXP Semiconductors MP-A11 Series Скачать руководство пользователя страница 6

WCT1012VLF/WCT1013VLH Consumer MP-A11 (WCT-

15W1CFFPD) V1.0 Wireless Charging Application User’s

Guide, Rev. 1, 05/2019

6

NXP Semiconductors

3. Application operation

Connect the demo to the USB PD or QC adaptor using a cable. The WCT starts to periodically send the
power ping to check whether a compatible Wireless Charging Receiver (WCR) is placed on the charging
surface.

When a Qi-compliant receiver is placed on the top of the TX coil area, the WCT starts the charging
process. If there is no correct Qi answer from the WCR side, the TX does not start the Qi charging
process.

If the WCR answers properly, the power transfer starts. The actual level of the transferred power is
controlled by the WCT in accordance with the WCR requirements. The receiver sends messages to the
WCT through the ASK on the coil resonance power signal and the transmitter sends the information to
the receiver using FSK, as per the Qi specification. The power transfer is terminated when the receiver is
removed from the WCT magnetic field.

The system supports all Qi WCR devices: Qi_Ver-1.0 compliance, Qi_Ver-1.1 compliance, and the Qi
EPP receiver. The system supports all the FOD features for different receivers. For the BPP receiver, the
power loss FOD is supported. For the EPP receiver, both the Q-value FOD method and the power loss
FOD method are supported.

4. Hardware description

Figure 5

shows the block diagram of the consumer wireless charger MP-A11 (WCT-15W1CFFPD).

Visit

to get the latest hardware design files.

The whole design consists of several blocks, which are described in the following sections.

«
...
4
5
6
7
8
...
»

Содержание MP-A11 Series


























































Отзывы:

Нет отзывов