NXP Semiconductors KW40 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 11

NXP Semiconductors KW40 Скачать руководство пользователя страница 9

Loading firmware

KW40 Heart Rate Monitor Using Bluetooth Low Energy, User's Guide, Rev. 0, 10/2015

Freescale Semiconductor, Inc.

9

6.1. Prerequisites

The following list details the required elements for the download process:

1. Download and install J-Link software v5.02 or higher from

2. J-Link or J-Link Pro debugger.

3. heart_rate_sensor.bin file with the latest firmware.

6.2. Download process

The following steps explain the downloading process for the firmware.

1. Copy the heart_rate_sensor.bin file to the J-Link software installation folder. It is typically

located in C:\Program Files\SEGGER for 32-bit systems and C:\Program Files (x86)\SEGGER
for 64-bits systems.

2. Make sure that the battery is inserted properly (see

3. Connect the J-Link debugger to the SWD header in the board as shown in the following.

Figure 9. J-Link connection

4. In the J-Link software installation folder, execute the program JLink.exe. A terminal window

will open (see

«
...
7
8
9
10
11
»

Содержание KW40












Отзывы:

Нет отзывов