manualshive.com logo in svg

NXP Semiconductors Kinetis KE1xZ256, Справочное руководство

Поделиться
Скачать
NXP Semiconductors Kinetis KE1xZ256 Скачать руководство пользователя страница 713

Chapter 35

General-Purpose Input/Output (GPIO)

35.1 Chip-specific information for this module

35.1.1 Instantiation Information

The number of GPIO signals available on the devices covered by this document are
detailed in the "Ordering information" of the DataSheet.

See 

Pin properties

 for features of each pins.

Port control and interrupt module features are supported, each 32-pin port will support a
single interrupt. The pins of PORT_E support digital filter functions.

35.1.2 GPIO accessibility in the memory map

The GPIO is multi-ported and can be accessed directly by the core with zero wait states at
base address 0xF800_0000. It can also be accessed by the core and DMA masters
through the cross bar/AIPS interface at 0x400F_F000 and at an aliased slot (15) at
address 0x4000_F000. All BME operations to the GPIO space can be accomplished
referencing the aliased slot (15) at address 0x4000_F000. Only some of the BME
operations can be accomplished referencing GPIO at address 0x400F_F000.

35.2 Introduction

The GPIO registers support 8-bit, 16-bit or 32-bit accesses.

Kinetis KE1xZ256 Sub-Family Reference Manual, Rev. 3, 07/2018

NXP Semiconductors

713

Содержание Kinetis KE1xZ256














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды