manualshive.com logo in svg

NXP Semiconductors Kinetis KE1xZ256, Справочное руководство

Поделиться
Скачать
NXP Semiconductors Kinetis KE1xZ256 Скачать руководство пользователя страница 478

uint32_t runBootloaderAddress;

void (*runBootloader)(void * arg);

 

// Read the function address from the ROM API tree.

runBootloaderAddress = **(uint32_t **)(0x1c00001c);

runBootloader = (void (*)(void * arg))runBootloaderAddress;

 

// Start the bootloader.

runBootloader(NULL);

 

22.3.6 Bootloader Protocol

This section explains the general protocol for the packet transfers between the host and
the Kinetis Bootloader. The description includes the transfer of packets for different
transactions, such as commands with no data phase and commands with incoming or
outgoing data phase. The next section describes various packet types used in a
transaction.

Each command sent from the host is replied to with a response command.

Commands may include an optional data phase:

• If the data phase is incoming (from host to bootloader ), then the data phase is part of

the original command.

• If the data phase is outgoing (from bootloader to host), then the data phase is part of

the response command.

NOTE

In all protocols (described in the next subsections), the Ack sent
in response to a Command or Data packet can arrive at any time
before, during, or after

 the Command/Data packet has

processed.

22.3.6.1 Command with no data phase

The protocol for a command with no data phase contains:

• Command packet (from host)
• Generic response command packet (to host)

Functional Description

Kinetis KE1xZ256 Sub-Family Reference Manual, Rev. 3, 07/2018

478

NXP Semiconductors

Содержание Kinetis KE1xZ256














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды