NXP Semiconductors JN517x-DK005, Руководство пользователя

Страница: 9 / 67

JN517x-DK005 Development Kit
User Guide
JN-UG-3121 v1.1 © NXP Semiconductors 2017 9
1. Introduction to the Development Kit
Welcome to the JN517x-DK005 Development Kit, which is based around the NXP
JN517x family of wireless microcontrollers. A ZigBee Smart Home Demonstration is
pre-loaded into certain kit components, allowing a small wireless network with IP
connectivity to be quickly assembled and used. The development kit can also be used
in conjunction with NXP’s range of Software Developer’s Kits (SDKs) to develop new
wireless network applications for the JN517x devices. Support resources are also
provided to allow the integration of a network into the ‘Internet of Things’ (IoT).
The wireless network protocols supported by the development kit are as follows:

IEEE 802.15.4

ZigBee 3.0 with ZigBee Lighting & Occupancy (ZLO) devices
This chapter introduces you to the development kit and wireless networks by
describing:

Contents of the kit - see Section 1.1

Wireless network fundamentals - see Section 1.2

IP connectivity - see Section 1.3

Network commissioning - see Section 1.4

Pre-loaded ZigBee Smart Home Demonstration - see Section 1.5
Note: The pre-loaded ZigBee Smart Home
Demonstration is based on ZigBee 3.0 with ZLO
devices.
Note 1: Details of the individual hardware components
of the kit are provided in Appendix A.
Note 2: If you wish to run the pre-loaded ZigBee Smart
Home Demonstration, go to Chapter 2 . A Quick Start
procedure for running this demonstration is also
provided on the
JN517x-DK005 Getting Started sheet
(JN-UG-3120) , which is supplied in the kit box.