manualshive.com logo in svg

NXP Semiconductors JN516x-EK001, Руководство пользователя, Страница: 56 / 86

Поделиться
Скачать
NXP Semiconductors JN516x-EK001 Скачать руководство пользователя страница 56

Chapter 4
Where Next?

 

56

© NXP Laboratories UK 2015

JN-UG-3093 v1.5

4.2.2 IEEE 802.15.4 SDK (JN-SW-4163)

The IEEE 802.15.4 SDK includes the IEEE 802.15.4 stack software and the following 
components:

802.15.4 Stack API for developing wireless network applications

Application Queue API for optional use in conjunction with the above API

JN516x Integrated Peripherals API for interacting with on-chip peripherals 

LPRF Board API for interacting with evaluation kit board resources

4.2.3 JenNet-IP SDK (JN-SW-4165)

The JenNet-IP SDK includes the relevant stack software, and the following 
components:

JenNet-IP WPAN APIs for developing applications for the WPAN domain

JenNet-IP LAN/WAN APIs for developing applications for the LAN/WAN 
domain

JenNet-IP Border-Router applications

JenNet-IP Browser (Java version) 

JenOS Persistent Data Manager (PDM) API for storing and retrieving context 
data in non-volatile memory

802.15.4 Stack API

JN516x Integrated Peripherals API for interacting with on-chip peripherals 

LPRF Board API for interacting with evaluation kit board resources

4.2.4 ZigBee Home Automation SDK (JN-SW-4168)

The ZigBee Home Automation SDK includes the ZigBee PRO stack software, the 
Home Automation (HA) profile and the following components:

ZigBee PRO APIs for developing wireless network applications

Home Automation API for incorporating HA functionality in applications

JenOS APIs for interacting with the RTOS and system management modules

802.15.4 Stack API

JN516x Integrated Peripherals API for interacting with on-chip peripherals 

LPRF Board API for interacting with evaluation kit board resources

ZPS and JenOS Configuration Editors (NXP plug-ins for Eclipse/BeyondStudio)

Note: 

The ZigBee Home Automation SDK is supplied in 

the same installer as the ZigBee Light Link SDK 

(JN-SW-4168) and requires the toolchain JN-SW-4141.

Содержание JN516x-EK001























































































Отзывы:

Нет отзывов