![NXP Semiconductors i.MX 8M Quad Скачать руководство пользователя страница 13](http://html.mh-extra.com/html/nxp-semiconductors/i-mx-8m-quad/i-mx-8m-quad_user-manual_1721997013.webp)
NXP Semiconductors
UM11558
Getting Started with NXP-based Wireless Modules on i.MX 8M Quad EVK Running Android 10 OS
3.4 88W8987-based Azurewave AW-CM358-uSD module
The Azurewave provides a uSD-1212 adapter with Wi-Fi module solution for i.MX 8M
Quad Evaluation Kit. The AW-CM358-uSD supports Wi-Fi through a uSD device interface
that conforms to the industry SDIO Full-Speed card specification and allows a host
controller using the SDIO bus protocol to access the Wireless SoC device. The AW-
CM358-uSD acts as the device on the SDIO bus, and features the following:
•
SDIO 3.0 standard
•
On-chip memory used for CIS
•
Supports 4-bit SDIO and 1-bit SDIO transfer modes
•
Special interrupt register for information exchange
3.4.1 Recommended antenna part
MAG.LAYERS: MSA-4008-25GC1-A2
3.4.2 Supported I/O signal level
•
SDIO (3.0/2.0) supports 1.8V for I/O signal
3.4.3 Supported RF standard
I/O voltage level
Wi-Fi
Bluetooth
AW-CM358-uSD
1x1 Wi-Fi 5 (2.4/5 GHz)
5.0
Table 5. Supported RF standard
3.4.4 Supported Wi-Fi features
AW-CM358-uSD and AW-CM358MA modules share the same Wi-Fi feature set. Refer to
Azurewave AW-CM358SM datasheet.
Note:
Azurewave AW-CM358-uSD supports both Wi-Fi and Bluetooth RF standards.
But as i.MX 8M Quad EVK did not define the FFC connector for Bluetooth, only Wi-Fi is
supported for i.MX 8M Quad platform with AW-CM358-uSD module combination.
UM11558
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
User manual
Rev. 1 — 29 January 2021
13 / 78