NXP Semiconductors FS5600, Руководство пользователя, Страница: 5 / 16

NXP Semiconductors
UM11642
KITFS5600SKTEVM evaluation board
3.3 Windows PC workstation
This evaluation board requires a Windows PC workstation. Meeting these minimum
specifications should produce great results when working with this evaluation board.
•
USB-enabled computer with Windows 7 or Windows 10
3.4 Software
Installing software is necessary to work with this evaluation board. All listed software
is available on the evaluation board's information page at http://www.nxp.com/
KITFS5600SKTEVM .
4 Getting to know the hardware
4.1 Kit overview
The KITFS5600SKTEVM is a hardware evaluation tool that allows performance test and
OTP programming of the FS5600.
An Emulation mode is possible to test different OTP configurations as needed. Different
inductors and MOSFETs are included in the kit to allow the user to try different switching
frequencies.
4.1.1 KITFS5600SKTEVM features
• VBAT power supply connectors
• SW1 output capability up to 100 mA (internal MOSFET) - load current limited due to
socket
• SW2 output capability up to 100 mA (external MOSFET) - load current limited due to
socket
•
EN1/2 switches
• PGOOD1/2 status indicators
• FS0B external safety pin
• LEDs that indicate signal or regulator status
•
Emulation mode capabilities
• USB connection and GUI for register access, OTP emulation and programming
4.2 Kit featured components
Figure 1 identifies important components on the board.
UM11642 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
User manual Rev. 1 — 23 July 2021
5 / 16