KIT33905 Evaluation Boards
, Rev. 2.0
Freescale Semiconductor
5
Required Equipment
3.2
Device Description/Features
•
Protected 5.0 V or 3.3 V regulators for MCU (part number selectable) and additional ICs (SPI
configurable) with optional external PNP usage to increase current capability for MCU
•
Fully-protected embedded 5.0 V regulator for the CAN driver
•
Extremely low quiescent current in low power modes
•
Multiple under-voltage detections to address various MCU specifications and system operation
modes (i.e. cranking)
•
Multiple wake-up sources in low power modes: CAN or LIN bus, I/O transition, automatic timer, SPI
message, and VDD over-current detection
•
Voltage, current, and temperature protection with enhanced diagnostics that can be monitored by the
system via a MUX output
•
ISO11898-5 high speed CAN interface compatibility for baud rates of 40 kb/s to 1.0 Mb/s. LIN 2.1 and
J2602 LIN interface compatibility
•
Pb-free packaging designated by suffix code EK
4
Required Equipment
4.1
Minimum Required Equipment
•
Power supply: minimum 5.5 V and 200 mA current
•
Any piece of equipment/board that is capable of producing TXD and/or CAN and LIN messages
•
KITUSBSPIDGLEVME (USB-to-SPI Kit)
•
USB cable
•
CABLE, RIBBON FLAT 16 PIN ASSY, 0.100" PITCH, 6" LENGTH
•
USB enabled computer with Windows XP or higher
•
SPIGen software (Setup.exe)