NXP Semiconductors
LPCXpresso55S36UM
LPCXpresso55S36 Development Board User Manual
Term
Description
SMT
Surface-mount technology
SPI
Serial peripheral interface
SWD
Serial wire debug
SWO
Serial wire debug trace output
UART
Universal asynchronous receiver/transmitter
USART
Universal synchronous/asynchronous receiver/transmitter
USB
Universal serial bus
VCOM
Virtual communication
Table 1. Acronyms and abbreviations
...continued
1.2 Related documentation
The table below lists and explains the additional documents and resources that you can
refer to for more information on the LPCXpresso55S36 board. Some of the documents
listed below may be available only under a non-disclosure agreement (NDA). To request
access to these documents, contact your local field applications engineer (FAE) or sales
representative.
Document
Description
Link
LPC553x Reference Manual
Intended for system software and hardware
developers and application programmers who want
to develop products with LPC553x/LPC55S3x MCU
LPC553x Data Sheet
Provides information about electrical
characteristics, hardware design considerations,
and ordering information
LPC55S6x/LPC55S2x/LPC552x
User manual (UM11126)
Intended for system software and hardware
developers and application programmers who want
to develop products with LPC55S6x/LPC55S2x/
LPC552x MCU
MCU-Link Energy Measurement
Capabilities Application Note
(AN13660)
This document shows the results of the MCU-Link
in different power settings and compares it to a
third-party tool
Table 2. Related documentation
1.3 Board kit contents
The table below lists the items included in the LPCXpresso55S36 board kit.
Item description
Quantity
LPCXpresso55S36 board
1
USB cable
1
M3 x 40 mm female-female brass hex standoff
4
M3 x 5 mm stainless steel Phillips pan head screw
4
LPCXpresso55S36 Quick Start Guide
1
Table 3. Board kit contents
1.4 Block diagram
The figure below shows the LPCXpresso55S36 block diagram.
LPCXpresso55S36UM
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2022. All rights reserved.
User manual
Rev. 2 — 5 September 2022
3 / 46