background image

FLEX-Link

 

(NV-FLXLK)

• Paired with FLEX24, FLEX8 or FLEX-Base
• Up to 50W PoE
• PoE mode A, mode B and 4-pair mode
• Local power option
• IEEE compliant

FLEX-Link Adapter Applications

10/100Mbps (full duplex, symmetrical) & PoE++ over multi-pair UTP with 2,000ft (610M) reach.  

NV-FLXLK-BSE

*

NV-FLXLK

NV-FLXLK

Standard PoE Switch

NV-FLX-024/NV-FLX-08

Local Power Option

Local Power Option

Multi-Pair UTP Cable

up to 2,000ft (610m)

Multi-Pair UTP Cable

up to 2,000ft (610m)

To Application

1 2 3 4 5 6 7 8

WE

3519

11

7

15

17

13

21

23

19

27

29

25

33

35

31

39

41

37

45

47

43

462

10

12

8

16

18

14

22

24

20

28

30

26

34

36

SFP+1

SFP+2

SFP 1

SFP 2

32

40

42

38

46

48

44

Reset

24

22

20

18

16

14

12

10

8

6

4

2

23

21

19

17

15

13

11

9

7

5

3

1

RUN

ALARM

FAULT

FLEX-Link

Long Reach PoE over UTP

IP ENDPOINT

IP ENDPOINT

FLEX-Link

Long Reach PoE over UTP

FLEX-Base

Long Reach PoE over UTP

FLEX-Link Quick Install Guide

The FLEX-Link adapter enables extended Ethernet and PoE reach beyond traditional 
distances using 1, 2 or 4 pair UTP infrastructure. When paired with the FLEX24 Switch, FLEX8 
Switch or FLEX-Base Extender, the adapter delivers 10/100Mbps, symmetrical full duplex. 

The FLEX offering is designed specifically to enable easy deployment over Multi-Pair UTP for 

reaches beyond that of standard Ethernet eliminating the costs and disruption associated 
with IDF closet requirements.

TO ENDPOINT

ACT

LNK

Link

Activity

TO LRE

37-55V

DC IN

ACT

LNK/SPD

Activity

37-55V

DC IN

Link/Speed

Green:

100Mbps

Orange:

10Mbps

To Endpoint

To LRE

(Long Reach Ethernet)

FLEX-Link

Long Reach PoE over UTP

1. Remove the FLEX-Link from its packaging.
2. Must ensure cable is properly terminated before connecting any FLEX product.
3. Remove all legacy equipment from the UTP cable infrastructure.

     NOTE: 

In order to avoid damage to endpoints, it is important that non-IP devices are not 

connected when you connect the FLEX-Link.

4. Connect the Network Infrastructure cable from the FLEX24 switch, FLEX8 switch or 

FLEX-Base to the FLEX-Link (LRE side).

5. Using CAT5 or higher category cable, connect the endpoint to the FLEX-Link (Endpoint 

side).

     

NOTE: 

FLEX-Link can be used with FLEX24 switch, FLEX8 switch or FLEX-Base

888.901.3633 | +44 (0) 208 977 6614
www.nvtphybridge.com

Copyright 2019 NVT Phybridge

445-0020-A

FLEX-Link

Long Reach Po

E over UTP

*Base Extender can be powered locally for use with non-PoE switches.

Отзывы: