26
# mstconfig -d
41
:
00.0
reset
Reset configuration
for
device
41
:
00.0
? ? (y/n) [n] : y
Applying... Done!
-I- Please power-cycle device to load
new
configurations.
>mstconfig
41
:
00.0
query
Device
1
:
----------
Device type: ConnectX-
3
PCI Device:
41
:
00.0
Configurations: Next Boot
SRIOV_EN True(
1
)
NUM_OF_VFS
8
WOL_MAGIC_EN_P1 False(
0
)
WOL_MAGIC_EN_P2 False(
0
)
Using mstconfig
Using mstconifg with PCI Device in Bus Device Function (BDF) Format
Example:
# mstconfig -d
41
:
00.0
Device
1
:
----------
Device type: ConnectX-
3
PCI Device:
41
:
00.0
Configurations: Next Boot
SRIOV_EN True(
1
)
NUM_OF_VFS
16
WOL_MAGIC_EN_P1 False(
0
)
WOL_MAGIC_EN_P2 False(
0
)
Using mstconfig to Set VPI Parameters
In order to set VPI parameters through mstconfig, use the following command line:
# mstconfig -d <device> set [LINK_TYPE_P1=<link_type>] [LINK_TYPE_P2=<link_type>]
Example: Configuring both ports as InfiniBand:
# mstconfig
41
:
00.0
set LINK_TYPE_P1=
1
LINK_TYPE_P2=
1
Device #
1
:
----------
Device type: ConnectX3Pro
PCI device:
41
:
00.0
Configurations: Next Boot New
LINK_TYPE_P1 ETH(
2
) IB(
1
)
LINK_TYPE_P2 ETH(
2
) IB(
1
)
Apply
new
Configuration? ? (y/n) [n] : y
Applying... Done!
-I- Please reboot machine to load
new
configurations.
Using mstconfig to Set SR-IOV Parameters
In order to set SR-IOV parameters through mstconfig, use the following command line:
# mstconfig -d <device> set [SRIOV_EN=<
0
|
1
>] [NUM_OF_VFS=<NUM>]
Example: Turning on SR-IOV and enabling 8 Virtual Functions per Physical Function:
# mstconfig -d
41
:
00.0
set SRIOV_EN=
1
NUM_OF_VFS=
8
