114
mstburn
Added the -fw_dir option which looks for a suitable firmware file in the
given directory
Linux
Support for generating a non-fail-safe image for ConnectX/ConnectX-2,
InfiniScale IV, and BridgeX devices
Linux
Debug tools
Updated the msti2c utility
Linux
Added the mget_temp utility which reads the temperature of the
ConnectX/ConnectX-2, InfiniScale IV, and BridgeX devices
Linux
mstflint Bug Fixes History
The table below lists the history of bugs fixed.
Internal Ref.
No.
Issue
2578580
Description:
Fixed an issue that resulted in getting MVPD read errors from the
mstfwmanager during fast reboot.
Keywords:
mstfwmanager, MVPD_READ4 failed, fast reboot
Discovered in Version: 4.16.0
Fixed in Release: 4.17.0
2628490
Description:
Fixed inconsistent flashing of the firmware when using the IPMB service.
Keywords:
mstflint
Discovered in Version: 4.16.0
Fixed in Release: 4.17.0
2395589
Description:
Changed the mstflint
"--activate"
flag behavior to include a minimal delay
of 1 second to avoid disconnections if the connected port is being activated.
To use the "legacy" activation flow, use the
"--activate_delay_sec 0"
command.
Keywords:
"--activate" flag, mstflint
Discovered in Version: 4.16.0
Fixed in Release: 4.17.0
2494596
Description:
mstflint now supports the
"--activate_delay_sec"
flag which performs the
activation on the newly burned firmware after the specified delay.
Note: The burn flow will be locked after this command has been sent for a couple of
minutes, until activation flow is done.
Keywords:
"--activate_delay_sec" flag, mstflint
Discovered in Version: 4.16.0
