58
MCX623102A[C/N]-ADAT Specifications
Physical
Size
: 5.59in. x 2.71in (142.00mm x 68.90mm)
Connector:
Dual
SFP56 Ethernet (copper and optical)
Protocol
Support
Data Rate
:
Ethernet
1/10/25 Gb/s
Ethernet
: 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-
CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR
PCI Express Gen 3.0/4.0
: SERDES @ 16.0GT/s, 16 lanes (2.0 and 1.1 compatible)
Power
Specifications
(a)
Voltage
: 12V
Power
Cable Type
PCIe Gen 3.0
PCIe Gen 4.0
Typical Power
(b)
Passive Cables
14.87W
15.68W
Maximum Power
Passive Cables
18.92W
19.74W
Maximum power available through SFP56 port:
2.5W (each port)
Voltage
: 3.3Aux
Maximum current
: 100mA
Environmenta
l
Temperature
Operational
0°C to 55°C
Non-operational
-40°C to 70°C
Humidity
90% relative humidity
(c)
Altitude (Operational)
3050m
Airflow Requirements @ 55C
(d)(e)
Cable Type
Hot Aisle - Heatsink to Port
Passive Cable
300LFM
Active 0.8 Cable
400LFM
Active 2.5W Cable
500LFM
Regulatory
Safety
CB / cTUVus / CE
EMC
CE / FCC / VCCI / ICES / RCM
RoHS
RoHS compliant
a. Power numbers are provided for passive cables only. For board power numbers while using active
cables, please add the outcome of the following formula to the passive cables power numbers stated
above:
Active_Module_Power
x
N
umber_of_Modules
x
1.1 (efficiency factor)
b. Typical power for ATIS traffic load.
c. For both operational and non-operational states.
d. Airflow is measured in wind tunnel.
e.
Contact Mellanox for airflow numbers with other active modules' power levels.