Nvidia DGX Station Скачать руководство пользователя страница 27

Страница: 27 / 105

Upgrading DGX OS Desktop Software on DGX Station

DGX Station

DU-08255-001 _v4.6 | 21

‣

Upgrading Within the Same DGX OS Desktop Major Release from the Command Line

CAUTION:

When you use these means to upgrade software on the DGX Station, you upgrade

all

software for which updates are available from your configured software sources, including

applications that you installed yourself. If you want to prevent an application from being

upgraded, you can instruct the Ubuntu package manager to keep the current version. For

more information, see

Introduction to Holding Packages (https://help.ubuntu.com/community/

PinningHowto#Introduction_to_Holding_Packages)

on the Ubuntu Community Help Wiki.

3.1.1. Upgrading Within the Same DGX OS Desktop

Major Release from the Software Updater

Application

Use the Software Updater applicaton to upgrade DGX Station in the same major release.
Ensure that you are logged in to your Ubuntu desktop on the DGX Station as an administrator
user.

1. Press the

Super

key.

2. In the search bar, type

Software Updater

3. Open the

Software Updater

, review the available updates, and click

Install Now

‣

If no updates are available, the

Software Updater

informs you that your software is up

to date.

‣

If an update requires the removal of obsolete packages, you will be warned that not all

updates can be installed.

To continue with the update, complete the following steps:
a). Click

Partial Upgrade

b). Review the list of packages that will be removed.

To identify obsolete DGX OS Desktop packages, see the lists of obsolete packages in

the

DGX OS Desktop Release Notes

for all releases after your current release.

c). If the list contains only packages that you want to remove, click

Start Upgrade

Содержание DGX Station










































































































Результаты поиска

Содержание DGX Station

Отзывы:

Похожие инструкции для DGX Station

Бренды по названию

Популярные бренды

Nvidia DGX Station, Руководство пользователя

Результаты поиска

Содержание DGX Station

Отзывы:

Похожие инструкции для DGX Station

Бренды по названию

Популярные бренды