Warning and Safety Instructions
WARNING:
1
. nVent ERICO products shall be installed and used only as indicated in nVent ERICO product
instruction sheets and training materials. Instruction sheets are available at www.erico.com
and from your nVent ERICO customer service representative.
2
. nVent ERICO products must never be used for a purpose other than which they were
designed or in a manner that exceeds specified load ratings.
3
. All instructions must be completely followed to ensure proper and safe installation
and performance.
4
. Improper installation, misuse, misapplication or other failure to completely follow nVent
ERICO’s instructions and warnings may cause product malfunction, property damage,
serious bodily injury and death.
SAFETY INSTRUCTIONS:
All governing codes and regulations and those required by the job
site must be observed. Always use appropriate safety equipment such as eye protection,
hard hat, and gloves as appropriate to the application.
The nVent ERICO System
3000
is manufactured by nVent.
International patents on the nVent ERICO System
3000
are existing.
Local distributors should be the user’s first point of contact with supply, delivery, installation,
limited warranty and checking of the system for compliance with manufacturer’s instructions.