CPCI System Subrack 3 U
Product Definition
24579-031
www.schroff.biz
4
R1.1, December 16, 2010
2.3 Subrack
The 3 U chassis is based on the Schroff europacPRO system with EMC
shielding. The card cage enables the assembly of 8 CPCI front boards
(3 U, 4 HP, 160 mm deep) and 8 Rear I/O Boards (3 U, 4 HP, 80 mm deep).
The lower guide rails of the card cage are equipped with ESD clips.
2.4 CPCI Backplane
The 3 U/ 8 slot Backplane provides:
•
CompactPCI bus 32 bit (PICMG2.0 R.3.0) with System Slot right
•
System slot expandable from 4 HP to 8 HP
•
Rear I/O on P2
•
V(I/O) 5 V (adjustable to 3.3 V)
•
Bridge connector for secondary Backplane
Applicable Specifications:
PICMG 2.0 R3.0 CPCI Core Specification
PICMG 2.01 R2.0 Hot Swap
PICMG 2.09 R1.0 System Management Bus
PICMG 2.10 R1.0 Keying
More information in the manual for the backplane order no.: 73972-075
Variations
The Schroff assembly service can customize your system with:
•
Different Backplane configurations
•
Drive mounting cassettes
•
Special power supplies
More information in the catalogue or at www.schroff.biz
