© 2018 Hoffman Enclosures Inc.
PH 763 422 2211 • nVent.com/HOFFMAN
87565317
- 4 -
2ENGLISH
Installation Instructions
Feed−Through Wireway
IV. CUT−OFF FITTING: Cut off the body to the desired length.
(remember to allow for the flange and gaskets) Be sure the body
is cut off squarely. Weld the extra flange to the body. Grind off all
burrs and sharp edges. Touch−up paint can be used to duplicate
the original finish.
V. SWIVEL NIPPLES:
A. To Install 2.5 X 2.5 And 4 X 4 Regular Type Swivel Nipple:
1. Position wireway section, flange gasket, swivel ring,
round swivel gasket, and swivel nipple in that order.
(see details 7 and 8) Position clips over round flange of
swivel nipple, and install screws and nuts.
B. To Install 6 x 6 and 8 x 8 Regular Type Swivel Nipple:
1. Position wireway section, flange gasket, and swivel
ring in that order. (see details 7 and 8) Attach swivel
ring to wireway flange with four flat−head screws and
nuts. Position round swivel gasket and swivel nipple on
swivel ring. Position clips over round flange of swivel
nipple and install screws and nuts.
Detail 6
Cut−Off Body
Flange Gasket
Extra Flange
Detail 7
Swivel Ring
Swivel Gasket
Swivel Flange
Flange Gasket
Wireway Sections
Clip
Detail 9
Clip
Enclosure
Swivel Gasket
Wireway Section
Swivel Nipple
Flange Gasket
Detail 8
Swivel Ring
Swivel Gasket
Wireway Sections
Swivel Nipple
Detail 10
Enclosure
Swivel Nipple
Wireway Section
Flange Gasket
Swivel Gasket
Connector Flange
Gasket
Connector Flange
Flange
Gasket
Clip
Flange
Gasket
C. To Install Box Entry Type Swivel Nipple:
1. Using the provided connector flange as a pattern,
trace the box entry cutout on the outside of the
enclosure and make the cutout.
2. Position the connector flange and the connector
flange gasket on the inside of the enclosure as
shown in detail 10. Then position the round swivel
gasket and the swivel nipple on the outside of the
enclosure as shown in details 9 and 10. Position
the clips over the round flange of the swivel nipple,
and install the screws and nuts.
