Nuvo INVU Скачать руководство пользователя страница 19

Страница: 19 / 104

Invu by Nuvo™

User Manual

Know Your INVU Sensor Band™

NV-UMLS-0012

Note:

Make sure that one of the indicator lights is lit at all times during a monitoring

session.

The battery is integrated into the

INVU Sensor Band™

Controller and is charged by the

medical-grade power supply through the USB type C connector. The medical-grade power
supply is supplied as part of the

INVU Sensor Band™

package.

•

Charging time (from an empty battery to a fully charged battery) is around two hours.

•

Under typical conditions, a fully charged battery will provide ~4.5 hours of continuous
monitoring.

Note: The

INVU Sensor Band™

battery is pre-charged before shipping. However, it is

recommended recharging it before first use to a fully charged battery.

3.3

Charging the

INVU Sensor Band™

Battery

Warning:

Remove the

INVU Sensor Band™

from your body before connecting the cable

for charging! Do NOT charge the battery while the

INVU Sensor Band™

is worn.

Caution:

Do not use any other charging cable or a power supply other than the one

supplied in the

INVU Sensor Band™

package!

Caution:

Always secure the cable of the

charger while charging the INVU Sensor Band™ to

avoid potential strangulations.

Power OFF the

INVU Sensor Band™

Note:

INVU

Sensor Band™ battery can be charged ONLY if the INVU Sensor Band™ power

is OFF. Attempting to charge the

INVU Sensor Band™

when it is powered ON will

automatically power it OFF.

Remove the band from your body before charging. For additional information see

“

Removing the

INVU Sensor Band™

” in section

5.3.

Figure 3-5. Charging

INVU Sensor Band™

battery

Содержание INVU









































































































Результаты поиска

Содержание INVU

Отзывы:

Nuvo INVU, Руководство пользователя, Страница: 19 / 104

Результаты поиска

Содержание INVU

Отзывы: