17
EN
TECHNICAL OWNER MANUAL
F
E
G
Installing Shifter Cables
4.
Install one shift cable, allowing the shifter
housing (
E
) to guide the cable around the
internals until it comes out the other side.
Guide the cable through the closest barrel
adjuster (
F
).
5.
Pull the cable through the barrel adjuster
until the cable anchor seats fully into the
grip pulley (
G
).
6.
Rotate the grip to position the next cable
for installation and repeat step 4. and
step 5.
7.
Reinstall the bottom cover and screw (
A
).
Torque to 0.2-0.3 Nm (2-3 in-lbs).
A
