17
Network Camera User Manual
4.2.6
Lens Control
This function is only available for the model with motorized zoom lens.
Go to
Config
→
Image
→
Zoom/Focus interface. Within this section, zoom and focus can be controlled.
If the image is out of focus after a manual adjustment, one key focus can be used to set the focus
automatically.
4.3
Alarm Configuration
4.3.1
Motion Detection
To set motion detection:
1. Go to Config
→
Alarm
→
Motion Detection to set motion detection alarm.
Check “Enable” check box to activate motion based alarms. If unchecked, the camera will not
send out any signals to trigger motion-based recording to the NVR or CMS, even if there is
motion in the video.
