16
Network Camera User Manual
To clear the video mask:
Go to video mask interface and then click “Clear” button to delete the current video mask area.
4.2.5
ROI Configuration
Go to Image
→
ROI Config interface as shown below. An area in the image can be set as a region
of interest. This area will then have a higher bitrate than the rest of the image, resulting in better
image quality for the identified area.
1. Check “Enable” and then click the “Draw Area” button.
2. Drag the mouse to set the ROI area. Up to 3 ROI areas can be set.
3. Set the level.
4. Click the “Save” button to save the settings.
