15
Network Camera User Manual
4.2.3
OSD Configuration
Go to Image
→
OSD interface as shown below.
Time stamp, device name and OSD can be set up here. After enabling the corresponding display
and entering the content, drag them to change their position. Then press the “Save” button to
save the settings.
4.2.4
Video Mask
Go to Image
→
Video Mask interface as shown below. A maximum of 4 zones can be set up.
To set up video mask:
1. Enable video mask.
2. Click the “Draw Area” button and then drag the mouse to draw the video mask area.
3. Click the “Save” button to save the settings.
4. Return to the live to verify that the area have been drawn as shown as blocked out in the
image.
