12
Network Camera User Manual
Go to Config
System
Storage
Record to go to the interface as shown below. You can set
the SD card record stream. Set the pre record time if you enable pre record. Click “Save”
button to save the settings.
Pre Record Time
: Set the time to record before the actual recording begins.
4.2
Image Configuration
Image Configuration includes Display, Video/Audio, OSD, Video Mask and ROI Config (the
lens control function is available for the models with auto varifocal lens).
4.2.1
Display Configuration
Go to Image
Display interface as shown below. You may set and adjust the picture’s
brightness, contrast, hue and saturation, etc.
Brightness
: Set the brightness level of the camera’s image.
Contrast
: Set the color difference between the brightest and darkest parts.
Hue
: Set the total color degree of the image.
Saturation
: Set the degree of color purity. The purer the color is, the brighter the image is.
Sharpness
: Set the resolution level of the image plane and the sharpness level of the image
