Package
Overview
Installation
1
2
3
4
Warning
and
Caution
NCT-5MLC-B2 Bullet Camera
Quick Start Guide
■
Please r
ead these instructions ca
refully before using the product
and
keep it for further reference.
■
All the examples and pictures used here are for reference only.
■
The contents of this manual are subject to change without
notice.
■
Visit nuvico.com for additional downloads, manuals, and
resources.
*
1
*
2 This series can be powered by DC 12V/PoE power supply. If
the
PoE switch is
used
to
power the
camera, DC12V
power supply
is
not
required
.
*
3
Press
and
hold
the
reset
button
for
more
than
10
seconds
to
restore to the factory
default setting.
It
is
recommended
to
install
the
security
cap
for
outdoor installation
.
Before you start, please make sure that the wall or ceiling is strong
enough to withstand three times the weight of the camera. Please install
the camera in a dry environment.
①
Install a micro SD card.
②
Drill the screw holes and the cable hole (if you want to route
through the ceiling) on the wall or ceiling according to the drill
template.
Camera
Quick
start
guide
Plastic
plug
× 4
Drill
template
Rubber plug
4 tapping screws
1 machine screw
1
Fixed
ring
2
Mounting
base
3
4
Network connector*
Audio input
5
Power connector*
6
Micro SD card slot
7
Reset
Security
cap
DC12V
1 2
3
4
5
6
7
■
If the product does not work properly, please contact your dealer or
the nearest service center. Never attempt to disassemble the camera
yourself. (We shall not be responsible for any problems caused by
unauthorized repair or maintenance.)
■
Do not allow water or liquid intrusion into the camera.
■
In the use of the product, you must be in strict compliance with the
electrical safety regulations of the nation and region. When the product is
mounted on wall or ceiling, the device shall be firmly fixed.
■
Do
not
u se
camera
beyond
specified
voltage
range
.
■
Do not drop the camera or subject it to physical shock.
■
Do not directly touch the camera when installing.
■
Avoid touching the camera lens
.
■
If cleaning is necessary, please use clean cloth to wipe it gently.
■
Avoid pointing the camera towards the sun or other light sources.
■
Do not place the camera in extremely hot, cold (the operating
temperature shall be -22˚F~140˚
F
), dusty or damp locations, and do
not
expose it to high electromagnetic radiation.
■
To avoid heat accumulation, good ventilation is required for
operating
environment.
∅4.6
48.08mm
48.08mm
