NUVE NF 200, Руководство пользователя

Страница: 11 / 18

10
Determine the rotor type, the speed and time, the acceleration and braking rates.
•
Load the rotor with samples by paying attention to the dynamic and static balances.
•
Set the all parameters for program.
•
Close the lid, see that the lid open warning led turns off.
•
Push the Encoder button.
5.3.1 PULSE MODE
•
Load the rotor with samples by paying attention to the dynamic and static balances.
•
Set the all parameters for program.
•
Close the lid, see that the lid open warning led turns off.
•
You can reach the desired speed by pressing and holding the Encoder button (6) within
the RPM speed limits you have set.
•
In the PULSE mode, the rotor operates according to the set acceleration and braking
values you set.
•
While operating in Pulse mode, press the Encoder button (6) and start counting from
the moment the rotor starts to accelerate. When you take your hand out of the Encoder
button, it will stop counting by braking.
The correct rotor type should be selected in order to see the correct
RCF values during the run.