NUVE NC 23B, Руководство пользователя

Страница: 12 / 36

12
7-
Waste Water Discharge Connector: Connector is used to empty the waste water tank. To
empty the waste water tank, the silicon stopper shall be removed and the hose shall be
pulled out.
8-
Communication Unit: Unit provides USB-1, USB-2, Ethernet and RS 232 inputs for
recording, software updating and remote connection.
9-
Safety Valve: Releases the excess steam automatically from the unit in case the inside
pressure surpasses 3 Bars. Also used to manually release the chamber pressure or to break
vacuum.
10-
Microbiological Filter: Used on the vacuum break connection to sterilize the atmospheric
air entering the unit.
11-
Condenser: The water vapor is condensed herein.
12-
Water Tank Lid: Has to be opened to fill up the water tank.
5.7.
CONTROL PANEL
Figure 4
The functions of F1, F2, F3 and F4 keys depend on the meaning of the corresponding symbol
appearing on the display. The following table shows the meaning of these symbols.
This symbol denotes the menu. You can enter the menu by pushing the key
corresponding to this symbol.
°C / Bar
This symbol denotes temperature and pressure. When the key corresponding
to this symbol is pushed, the screen which shows temperature and pressure
values of all sensors in sterilizer.
This symbol denotes the graph screen. Temperature and pressure values of
current or last sterilization cycle can be monitored on a graph by pushing the
key corresponding to this symbol.
This symbol denotes the start key. When the key corresponding to this symbol
is pushed, the chosen sterilization program would start.