6.5.3. Exit Service Lockout
1. Unlock the Operator Interface by clicking the menu and
Unlock
2. From the menu, select
Service
to bring up the Service page
3. Exit the Service Lockout by clicking
Exit Service Lockout
Exiting Service Lockout may close contactors
You will be able to access the dashboard controls once Nuvation Energy BMS has successfully exited
service lockout.
6.5.4. Troubleshooting
During the configuration file import, if you receive a
Register Write failure error
, ensure you have valid
entries in your configuration file. For details on the various registers and their intended use, please
refer to the
Software Reference Manual
for your Nuvation Energy BMS.
While exiting the service lockout, if a failure is reported, please see
for troubleshooting
details.
If the failures persist, please submit a support ticket with as much detail as possible
to
Nuvation Energy Stack Switchgear - Product Manual
Document ID: NE-PM-003
58
Rev 1.0, 2020-09-03
