NUTRIBULLET NBP50100, Руководство пользователя

Страница: 12 / 15

STEP 1:
The most important thing — ALWAYS
POWER OFF THE UNIT and UNPLUG
the Motor Base from the power
outlet when it is not in use.
NOTE:
Do not attempt to handle the
appliance until all parts have stopped
moving! This includes during assembly
and disassembly, while changing
accessories, during cleaning, and any
time you leave the machine unattended
STEP 2:
Detach the blades and other
attachments from the Motor Base.
STEP 3:
Clean the individual components
as recommended in the following
sections.
MOTOR BASE:
• To avoid risk of injury, NEVER
attempt to clean the actuator
system on the Motor Base while
the unit is plugged in.
• Do not attempt to remove any
pieces from the Motor Base.
• Use a sponge or dish cloth
dampened with warm soapy
water to wipe down the Motor
Base until clean.
• If necessary, you may use a
small brush to scrub the
actuator system area to ensure
it’s clean.
Cleaning the nutribullet
®
Food Processor is quick and easy. All
detachable parts (Blade Adaptor, Chopping Blade, Dough Blade, Slice/
Shred Discs, Spiralizer Disc, Work Bowl, Work Bowl Lid, and Dual-Size
Food Pusher) are TOP RACK dishwasher-safe. The Motor Base can be
quickly hand-washed with a damp cloth. Read on for best practices.
Care & maintenance.
• To clean leakage residue from
the Motor Base, wipe with a
damp sponge and warm water.
WARNING
: Never submerge the
Motor Base in water.
ALL DETACHABLE PARTS:
WARNING:
Blades are sharp!
Handle all blade attachments with
care when cleaning!
• The Blade Adaptor, Blade
Attachments, Work Bowl,
Work Bowl Lid, and Dual-Size
Food Pusher are all TOP RACK
dishwasher-safe. These parts
may also be cleaned by hand
with warm soapy water.
• We recommend cleaning all
removable parts after each use
to reduce the buildup of residue.
WARNING:
NEVER use the sanitize
cycle — heat this high can warp
the plastic.
WARNING:
Do not clean the
Work Bowl, Work Bowl Lid, or other
parts of the appliance with steel
wool pads/balls or other hard
material that might scratch your
Food Processor.
The blade attachments conveniently store within the Work Bowl when
not in use. Make sure the unit is powered off and unplugged before
placing attachments in the Work Bowl for storage. Read on for details:
How to store.
the Slice/Shred Discs. When storing
the Spiralizer Disc, align the notches
on the Spiralizer Disc with the tabs
that are located inside of the Motor
Base towards the top. Ensure the
disc is properly seated on the blade
and adapter, inside of the Motor
Base, and turn the Spiralizer Disc so
that the 'FRONT ' is aligned with the
front of the Motor Base.
STEP 5:
Place the Work Bowl Lid onto the
Work Bowl and lock into place, with
the Dual-Size Pusher nestled in the
Feed Chute.
NOTE:
The power cord wraps under the
bottom of the Motor Base – keeping it
neatly tucked away when stored.
Replacement parts.
To order additional parts and accessories, please visit our website
at nutribullet.com/shop/accessories or feel free to contact
Customer Service: 1 (800) 523-5993.
NOTE:
All included blades and discs will
not store in the work bowl together, you
will have two storage options:
OPTION 1:
Chopping Blade, Dough
Blade, 2 Slice/Shred Discs
OPTION 2:
Chopping Blade, Dough
Blade, 1 Slice/Shred Disc, Spiralizer Disc
STEP 1:
Place the Blade Adaptor on the
center shaft.
STEP 2:
Lower the Chopping Blade onto
the Lower the Chopping Blade onto
the blade shaft, and then lower the
Dough Blade onto the blade shaft
so that it sits above the Chopping
Blade on the shaft.
STEP 3:
Lower the disc attachments onto
the adaptor, on top of the Chopping
Blade. In storage mode, the discs
should sit in the lower position on the
adaptor than when used in normal
operation. In storage mode, the lines
on the disc will NOT be aligned with
the lines on the adaptor.
STEP 4:
The Spiralizer Disc should be the
last disc stored, if storing with one of
23 22