Wave Rider Water Proof
Wireless Speaker
User’s Manual
Introduction:
The Wave Rider Wireless Speaker can be used
with tablet, notebook and other types of
smartphone to stream music,and enjoy
handsfree calling.In order to get the best results
when using the device,please read this manual
first before using.
Feartures
-Volume control
-Stunning sound
-Ultra portable design
-Great for parties, indoor and outdoor
-Hands free calling facility
Specifications
Loudspeaker: 4Ω 5W
Built-in Power:Li-ion 600mAh
Dimensions: 93mm(W)*93mm(L)*42mm(H)
SNR:80± 3dB
Wireless Working Frequency: 2.402-2.480 Ghz
Wireless Transmission Distance: up to 10m
Charging Time: 1-2 hours
Weight: 180 g
Speaker Dimension: 45mm
Charging: 5 V, 500mA
Package Contents
Important Safety Precautions
When using your Wave Rider Speaker, basic
safety precautions should always be followed,
including the following:
1. Keep this product and its charging cable
away from excessive heat.
2. Do not operate this device with a damaged
cable or after it has malfunctioned or has been
damaged in any manner.
3. Do not disassemble your device.
4. To avoid eletrical failure, use within tested
rating of submerged in up to 1 metre of water
for a 30 minute duration.
Charging Your Speaker
1. Connect one end of the included USB
Charging Cable to the Charging Port on your
speaker. Then plug the other end of the USB
Charging Cable into a suitable USB port on
your computer to recharge your speaker’s
internal rechargeable battery.
NOTE: The internal battery of your speaker
takes approximately two hours to charge when
completely drained.
2. When charging, a red LED light will
illuminate to indicate that the unit is charging.
The red light will turn off when your unit is fully
charged.
A Quick Look at Your Device
Page 1
Page 2
Page 3
EN
Model :NU-024
NU-024
1. Wireless Speaker
2. USB Charging cable
3. User manual
4. Carabiner
1. Previous:
Press and hold
to access the last track in
playlist.Press to lower the
volume.
2. Phone:
Press this button
to activate the speaker phone
function. When music is
playing, press to play or
pause a track.
3. Next:
Press and hold to
access the next track in a
playlist.Press to increase the
volume.
1. Charging Port
You can plug one end of the
included USB Charging
Cable into this jack, while
plugging the other end into a
USB port on your computer in
order to charge your
speaker’s built in lithium
battery.
2. ON/OFF Switch
Press and hold the“ ”for
power on
Press and hold the“ ”again
for power off
1
2
1
3
2
Understanding the LED Status Lights
When Charging Your Speaker
Solid red LED = Charging
No red LED = Charge Complete
When Pairing Your Speaker to a Bluetooth
Audio Source
Rapid blinking blue LED: Device not connected.
(Ready to pair.)
Solid blue LED: Device connected.
