RINA
Approved
User & Maintenance Handbook
Model HULK and Type 10 / Type 25
UK
Introduction
Dear Customer,
The Hulk tank you have purchased is certified by RINA to be used on boats equipped
with outboard motors.
We recommend to carefully read and strictly follow the instructions given in this handbook
concerning the installation of tanks on board.
This tank is due to be used solely on board of boats , to contain petrol, diesel or fuel
containing ethanol or methanol.
All different use is strictely forbidden.
Installation
The Hulk is supplied with::
• Deck fill opening with threaded plug and built-in vent
• Feed pipe with filter
•
Hole to accept return pipe {only for type 25 Diesel (44789)}
• Installed fuel gauge {only for Hulk 22 (44804), Hulk 30 (44805) and Type 25(44789)}.
The tank, as above described, has been positively tested in the factory to verify its
tightness.
Any alteration to the initial conditions can compromise the Hulk tightness.
It is particularly recommended :
1) (Type 25 only Diesel 44789) install return pipe by screwing of the cap and by screwing
the pipe (not supplied)
2) suck the internal of the tank in order to remove any possible cutting;movements during
the navigation.
STAMPAGGIO, SOFFIAGGIO MATERIE PLASTICHE, PRODUZIONE ARTICOLI NAUTICI
LALIZAS ITALIA s.r.l.: Via Fontanello 22, 16012 Busalla (GE) Italia, Tel.: +39 010 96801, Fax: +39 010 9680150-159, e-mail: [email protected]