NUOVA ELETTRONICA DSP LASER, Инструкция по эксплуатации

Страница: 41 / 66

DSP LASER
DSPLSR01EN 37
Fig. 12.8 Identification plate of AL1B module
The following data are reported on the identification plate of AL2B:
•
Name, address and contact references of the Manufacturer of the device
•
Logotype
“Costruito in Italia”
•
Part of the device: DSP LASER-AL
•
Indication of the type of AL, that is its configuration
•
Power supply voltage: IN 230 Vac or IN 24 Vac, and GROUND
•
Connections to TX: GROUND, OUT 0Vdc/P, OUT 24V/P, SINC
•
Connections to RX: GROUND, OUT 0Vdc/P, OUT 24V/P, SINC, 0Vdc/P, 0Vdc/P,
OSSD1 24Vdc, OSSD2 24Vdc
•
Outputs of relay NA OSSD contacts: OSSD 1 CR, OSSD 1 CR, OSSD 2 CR, OSSD 2
CR
•
Serial number and manufacturing date
Fig. 12.9 Identification plate of AL2B module