NumaLink-3.0™ Users Guide and Service Manual
Page 15 of 33
Stability delay
The number of seconds to wait, after translation input files have been
detected, to determine whether they are stable. (See section 3.1 for more
information.)
Post-translation
application
An application (executable image, script, etc) that is executed after work is
done for this translation.
Copy to New
Create a new translation, setting its parameters from the selected existing
translation.
Customize
Set various customization parameters for this translation; see section
Error!
Reference source not found.
for details.
Update
Apply changes to the selected translation.
New
Create a new translation.
DICOM
set DICOM configuration parameters for the selected translation; see
section 4.2.2 for details.
Delete
Delete the selected translation
Reset
Discard any unsaved changes to the selected translation.
Save Translations
Save the current translations.
Reload Translations
Discard the current translations and reload previously saved translations.
4.2.1 Customization
Customization is the process of further defining a translation to meet various site-specific needs. You
customize a translation by selecting it and pressing the “Customize” button (see Figure 7).
The customization dialog and settings are described in detail in
Numa Translation Customizations
:
C:\Program Files\Numa\Documents\Numa Translation Customizations.doc
4.2.2 DICOM
The DICOM dialog, shown in Figure 8, allows you to provide DICOM Application Entity (AE)
information related to a translation. The dialog is enabled only for output formats that support the
DICOM standard. (There are currently no input formats that support DICOM AEs.)
If DICOM AE information is provided for an output format, the translation includes a DICOM request to
store the translated data to one or more specified AEs.
Each DICOM configuration item is described in Table 4-3.
