GENERAL FITTING GUIDE
CONCEALED 2/3/4 WAY DIVERTER VALVE
Important Information
(Please leave this installation & user guide with the end user)
This installation guide is for a concealed 2/3/4 way diverter valve. It covers the installation and operation
of the fitting.
The water feed to this product will need to come via a suitable valve that has a built in on/off function
(there is no on/off control with this diverter valve).
These diverter valve models are operated manually, and are designed with multiple outlets which will
allow up to four shower accessories to be used (only one shower accessory can be used at once as
these are not designed for a “split” water flow between ports).
Two blanking caps are also supplied to allow the installer to cap off any ports that are not required
We recommend that this product is fitted by a fully qualified installer. The installation must comply with
all current water regulations. Please note: This valve MUST be commissioned during installation to suit site
conditions. In order for this product to operate as designed it must be installed and commissioned as
stated in this manual.
PRODUCT SHOWN WILL VARY
DEPENDING ON MODEL
Safety
