manualshive.com logo in svg

NuDAQ PCI-7256, Руководство пользователя, Страница: 45 / 46

Поделиться
Скачать
NuDAQ PCI-7256 Скачать руководство пользователя страница 45

Warranty Policy 

•

 39 

Warranty Policy 

Thank you for choosing ADLINK. To understand your rights and enjoy all 
the after-sales services we offer, please read the fo llowing carefully. 

1. 

Before using ADLINK’s products, please read the user manual and 
follow the instructions exactly. When sending in damaged products 
for repair, please attach an RMA application form. 

2. 

All ADLINK products come with a two-year guarantee,free of repair 
charge. 

• 

The warranty period starts from the product’s shipment date from 
ADLINK’s factory

 

• 

Peripherals and third-party products not manufactured by ADLINK 
will be covered by the original manufa cturers’ warranty

 

• 

End users requiring maintenance services should contact their 
local dealers. Local warranty conditions will depend on the local 
dealers  

3. 

Our repair service does not cover two-year guarantee while 
damages are caused

 

by the following: 

a.  Damage caused by not following instructions on user m enus. 

b.  Damage caused by carelessness on the users’ part during product 

transportation. 

c.  Damage caused by fire, earthquakes, floods, lightening, pollution 

and incorrect usage of voltage transformers. 

d.  Damage caused by unsuitable storage environments with high 

temperatures, high humidity or volatile chemicals. 

e.  Damage caused by leakage of battery fluid when changing 

batteries. 

f.  Damages from improper repair by unauthorized technicians. 

g.  Products with altered and damaged serial numbers are not entitled 

to our service. 

h.  Other categories not protected under our guarantees. 

4. 

Customers are responsible for the fees regarding transportation of 
damaged products to our company or to the sales office. 

Содержание PCI-7256















































Отзывы:

Нет отзывов