2
Cable connections
Please connect all sources and the optional sub-
woofer to one of the two speakers of the stereo
pair.
Analogue XLR connection: Here, as an exception, each loudspeaker
is supplied with the corresponding signal separately.
At the digital Port input, you can plug in the supplied HDMI/ARC
adapter, enabling the direct connection of a TV.
Each nuPro loudspeaker is connected to the power grid using
the supplied power-cable.
Press the power switch on the back to turn on the speaker! If neces-
sary, press the power-button on the remote control to “wake up” the
speaker.
Caution!
Be careful not to scratch the loudspeaker! Don’t let any
items fall into the bass reflex ports!
Place the speaker upside down on a soft, non-scratching surface!
Place the out-rigger feet over the threaded bushings as shown in the
picture and mount the feet securely with the supplied bolts and hex
key. You can now turn the loudspeaker around, place it on its feet
and adjust the mini-spikes for a level, stable stand.
Rückseite
Rückseite
2x Out-rigger feet
4x hex
socket screws
mini-spike
1x hex key
2x Out-rigger feet
4x hex
socket screws
mini-spike
1x hex key
nuPro X-6000
nuPro X-8000
nuPro X-6000/8000 · Quick Start Guide E12 · 11/2019
1
!
1
Setup and mounting of the out-rigger feet
nuPro X-6000 and X-8000 floorstanding speakers in stereo set-ups
QUICK START
GUIDE
®
E12
You can find the most recent version of the operating manual here: www.nubert.de/downloads/61/
