background image

4

nuPro AS-250 

·

 

4/2020 EN 

Stereo jack cinch cable  

(3.5 mm jack cinch), 1.5 m

Unpacking and Scope of Delivery

Unpacking

Avoid using sharp or pointed objects when unpacking your speak-

ers. Please keep the packaging in a safe place in case you need to

transport the speaker at a later date.

Scope of delivery

If the delivery is complete, it contains the following parts:

•  1 nuPro AS-250 active stereoboard

•  3 Cloth grilles

•  1 Remote control with battery

•  1 Mains cable, 2 m

•  4 Signal cables:

– SPDIF coaxial cable, 3 m

–  Stereo jack cinch cable (3.5 mm jack cinch), 1.5 m

– Fibre optic cable with TOSLINK plugs, 1.5 m

– USB cable (Type A/Type B), 1.5 m

Setup

The nuPro-soundboard AS-250 is a high-quality, very neutral active 

stereo loudspeaker. It impresses with an extremely homogeneous, 

precise, and “direct” sound reproduction with the finest resolution 

in the entire frequency spectrum. However, even an “honest loud-

speaker” is exposed to the manifold influences of room acoustics. 

In order to achieve the most natural and true-to-life reproduction 

possible, please observe the following general installation guide-

lines:

Due  to  the  side-facing  bass  reflex  ports  and  drivers,  the  AS-250 

should be placed at least 5 centimetres from the side wall in order 

to ensure trouble-free operation and to avoid air flow noises. More 

distance to the back- and side walls also helps prevent an increase 

in the bass- and fundamental ranges.

When placed on a shelf, the best sound is achieved when the front 

edge of the speaker is either flush with the shelf or protrudes slight-

ly. This allows the loudspeaker to radiate the sound freely into the 

room and helps to avoid voices sounding like coming through a 

funnel.

Ideal horizontal listening area

The best listening experience is achieved directly in front of the AS-

250. If you often need to sit off-centre and thus outside the opti-

mum listening area, we recommend that you compensate with the 

sound controls.

Placing the speaker at the optimum height

The most natural sound is achieved when the tweeters are approxi-

mately at ear level. But even 30 degrees above or below the tweet-

er axis, the sound is still homogeneous. If the AS-250 is placed 

directly beneath your TV, you will in most cases be within the opti-

mum listening area already. If the speaker needs to be placed low-

er or higher, it should ideally be angled so that the tweeters are 

aimed at the listening position. If this is not possible, we recom-

mend compensating with the sound-controls.

Cloth grille

The cloth grille protects the loudspeaker drivers (for example from 

curious children who like to press in tweeter domes) and provides a 

visual contrast for those who do not like the technical appearance 

of loudspeaker drivers. It is carefully placed against the front of the 

speaker and held in place magnetically. Please make sure that the 

surface of the baffle is not damaged. 

With the cloth grill removed, the loudspeaker sounds somewhat 

brighter and clearer – the choice is yours 

SPDIF coaxial cable, 3 m

Fibre optic cable with TOSLINK plugs, 1.5 m

USB cable (Type A/Type B), 1.5 m

1 Mains cable, 2 m

Remote control  

with battery

nuPro AS-250 Active Stereoboard with  

2 grilles for the sides and 1 grille for the front

Содержание nuPro AS-250













Отзывы: