TouchPoint Console Installation and Setup Guide
33
Chapter 4: Additional Local Configuration
Network
Set an IP Address for TPC. Use either DHCP to assign an address, or assign a static IP address. Each TPC must use a
unique IP Address on the network.
Allow DHCP to Assign an IP Address to TPC
1
Press DHCP, then click Test to have TPC contact the DHCP server for an IP Address. The Current Settings field
updates when the Test is complete. If successful, you will see the following information under Current Settings:
Method: DHCP
IP Address - x.x.x.x
Netmask - x.x.x.x
Gateway - x.x.x.x
Lease Time (mins) xxxxx
2
Press OK to save the change.
When you log out of the Administrative Options, TPC contacts the DCE server to update the settings you changed.
