manualshive.com logo in svg

NUANCE Equitrac TouchPoint, Инструкция по установке и настройке, Страница: 26 / 60

Поделиться
Скачать
NUANCE Equitrac TouchPoint Скачать руководство пользователя страница 26

 Chapter 3: Initial Local Configuration

26

Equitrac Professional TouchPoint Console Installation and Setup Guide

Upgrade TouchPoint Console Firmware

Your TouchPoint Console ships with up-to-date platform firmware and application data versions. Before allowing 
users to access TPC, use the compatibility information below to determine if the TPC application and/or firmware 
must be upgraded or downgraded to work with the installed version of Equitrac Professional.

The Terminal Updater utility is installed on the Core Accounting Server in the Equitrac > Professional > Tools folder. 

NOTE: 

If you have already used the TPC Installation Wizard to setup TPC on the network, this tool will maintain your 

settings.

Before you start

• Determine the type of Fax Board used in the TPC. Determining the version of fax board installed on the unit (if 

any) determines how the fax board must be configured. For detailed information about fax configuration, see 

Fax 

board discovery

 on page 44.

• Obtain the most recent platform and application firmware version from the Equitrac Partner portal and save the 

file on the Core Accounting Server. Platform firmware is a .bin format file and application firmware is a .zip format 
file. 

• TPC must be connected to the network and it is helpful to know its IP Address. If you are updating more than one 

TPC, record the IP Addresses of all Consoles you want to update. 

• You must have Administrative access on the Core Accounting Server to run this tool. 

Firmware considerations

When installing a new, upgraded, or repaired TPC, the terminal software may be incompatible with older installations 
of Equitrac Professional. In these cases, the firmware must be downgraded. Downgrading the firmware follows the 
same process outlined in 

Update the firmware

 on page 27, but rather than new firmware, older firmware is used. 

There are specific firmware versions and applications that work with specific versions of Equitrac Professional. 
Consult the following chart to determine the correct firmware needed for such an installation:

2.x Release

Legacy 1.x

Application 
Version

Platform Firmware 
Version

Application 
Version

Platform Firmware 
Version

EP 5.2.0

N/A

N/A

1.0.17.15

1.0.36

EP 5.2.2

N/A

N/A

1.0.19.50

1.0.36

EP 5.2.3

2.1.1.57

2.0.1.2

1.1.1.112

1.0.36

EP 5.2.4

2.1.1.57

2.0.12

1.1.1.112

1.0.36

EP 5.3.0

2.1.1.57

2.0.12

1.1.1.112 or 
1.1.3.87

1.0.36

Содержание Equitrac TouchPoint





























































Отзывы:

Нет отзывов