1
13. 10. 20. Document Number 671791
Nuaire |
Western Industrial Estate
|
Caerphilly
|
CF83 1NA
|
nuaire.co.uk
DRI-ECO-4S
4 Way Switch For DRI-ECO Units With RF Control
Installation Manual
EMC Directive
2014/30/EU
LVD Directive
2014/35/EU
1.0 SAFETY INFORMATION
•
This appliance should not be used by children or persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge, unless they have been given supervision
or instruction concerning the safe use of the appliance by a person responsible for their safety.
Children shall not play with the appliance. Cleaning and user maintenance shall not be carried
out by children.
1.1 Symbols
GENERAL WARNING
Signifies a general warning regarding hazard specified by supplementary information.
REFER TO INSTRUCTION MANUAL
Read and understand the installation and maintenance manual before installing,
operating or maintaining this product.
1.2 Important Information
This manual contains important information on the safe and
appropriate assembly, transport, commissioning, operation,
maintenance, disassembly and simple troubleshooting of the product.
While the product has been manufactured according to the accepted
rules of current technology, there is still a danger of personal injury or
damage to equipment if the following general safety instructions and
the warnings contained in these instructions are not complied with.
•
Read these instructions completely and thoroughly before
working with the product.
•
Keep these instructions in a location where they are accessible
to all users at all times.
•
Always include the operating instructions when you pass the
product on to third parties.
1.3 Personal Protective Equipment
The following minimum Personal Protective Equipment (PPE) is
recommended when interacting with Nuaire product:
•
Protective Steel Toed Shoes -
when handling heavy objects.
•
Full Finger Gloves (Marigold PU800 or equivalent) -
when
handling sheet metal components.
•
Semi Fingerless Gloves (Marigold PU3000 3DO or equivalent)
- when conducting light work on the unit requiring tactile
dexterity.
•
Safety Glasses
- when conducting any cleaning/cutting operation
or exchanging filters.
•
Reusable Half Mask Respirators
- when replacing filters which
have been in contact with normal room or environmental air.
Nuaire would always recommend a site specific risk assessment by a
competent person to determine if any additional PPE is required.
2.0 INSTALLATION
The switch is provided with an adhesive foam pad to allow quick and
easy mounting to the wall. Alternatively the switch may be mounted to
the wall using the fixing plate (screws are not provided).
Remove the switch fixing plate by inserting a flat head screwdriver in
the rear of the switch on the left or right side, underneath the fixing
plate and gently lever up the plate until the fixing lug releases. Repeat
for the opposite side. This will give access to the battery compartment
on the rear of the PCB and release the fixing plate. Reassemble the
remaining components and press into place, an audible click will be
heard. 1x CR 2032 battery is provided and expected lifetime is 10 years
under normal use.
1
DRI-ECO-4S
2.1 Binding Unit To Switch
Where a RF control ancillary is present, it must first be bound to the fan
unit before it can work. In order to bind the sensor(s) the fan must be in
binding mode.
